A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

A-Plus Sea Master® Marine Boot Topping Paint is a marine paint formulated for use on marking the waterline/seawater level of marine boats and vessels. It offers superior resistance against salt-water and various chemicals like fuel and engine oil as well as having easy cleaning properties against grime build-up and attachment of marine organisms.

☑1-Component, Easy to Use
☑Superior Durability and Adhesion
☑Good Resistance to Seawater, Chemicals, and Oils
☑High Solids Glossy Coating
☑Protection Against Abrasion and Rusting
☑Lead-Free, Safe for Marine Life

Category: Marine Coatings Tag: Two-component Epoxy Based Coatings

Specifications

Principal Uses: For marking the waterline/seawater level of boats, ships, and vessels.

Sheen: Gloss

Coverage: 25-30 sqm per gallon / coat

Surface Dry: 6–8 hrs

Recoat Interval: 1 day

Dry Through: Cures Overnight. Full strength within 3 days

Thinning: A-Plus® Enamel Reducer

Clean-up Solvent: A-Plus® Enamel Reducer

Application: Brush, Roller, Spray

Packaging: 1L, 4L

Available in: Red, Black

Surface Preparation & Precautions

Surface to be painted must be thoroughly cleaned, free from any contaminants that can affect adhesion such as wax, oil, grease, rust, and loose particles.
Sandblasting or powertool-assisted cleaning should be performed on highly corroded steel surfaces prior to painting.
If previously painted, strip off all loose and chalking paint with A-Plus Supertanggal® Paint Remover.
Avoid painting under extreme environmental conditions and/ or bad weather conditions.
MIX WELL before using.

Painting Procedure

Primer: Observe proper surface preparation. Mix product well before applying at least 2 coats of A-Plus Sea Master® Marine Anti-Corrosive Epoxy Primer using either a brush, roller, or spray. Allow at least 8 hours drying time before recoat.
Putty: Patch up minor surface imperfections with fully mixed components of A-Plus A&B® Heavy-Duty Marine Epoxy Adhesive. Sand lightly then spot prime before proceeding with topcoat.
Topcoat: Apply at least 2 coats of A-Plus Sea Master® Marine Boot Topping Paint using either a brush, roller, or spray. Mix well before using.

Color Swatches

9606

RED
9608

BLACK

A-Plus Sea Master® Marine Boot Topping Paint

Specifications

Surface Preparation & Precautions

Painting Procedure

Color Swatches

Related products

Login