A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

A-Plus Impregnator® Sealer is a nanoparticulate penetrating water repellent used for creating a moisture resistant barrier in natural and synthetic deco stones, mineral plasters, concrete and masonry, stucco, grouts, bricks, and other porous substrates. Its unique formulation allows it to penetrate and chemically bond with the substrate to form an invisible barrier resistant to water and stains. It provides protection while preserving the natural appearance and texture of the substrate.

☑Interior/Exterior Use
☑Ready-To-Use, Easy Application
☑Performs Well on Both Neutral and Alkaline Substrates
☑Superior Water Repellency
☑Protects and Maintains Natural Surface Appearance
☑Chemically Bonds and Deeply Penetrates Pores
☑Creates Water Beading Effect

Categories: Construction Chemicals, Stone Care

Specifications

Principal Uses: Used for sealing porous substrates like natural and artificial deco stones, precast concrete and masonry, bricks, stucco, cement fiberboards, and many more.

Sheen: N/A

Coverage: 30-40 sqm per gallon / coat depending on surface porosity

Surface Dry: 30 mins

Dry Through: 1 hr

Thinning: Use as supplied

Clean Up: Water

Application: Brush, Roller, or Spray

Packaging: 1L, 4L

Surface Preparation & Precautions

Precautions:

Do not use acid etching products on areas or surfaces to be treated.
Product must be applied directly to bare mineral substrates only.
Do not apply on direct sunlight or on extreme weather conditions.
Reactions or water beading effect differ from substrate to substrate.
This product willl not hide cracks, blemishes, and other surface imperfections.

Surface Preparation:

Wash and remove residues that could inhibit contact between the product and the mineral surface. If necessary, perform power washing or intense scrubbing.
Surface to be treated must be dry, sound, and firm, free from dust, dirt, laitance, oil, waxes, and other contaminants.

Painting Procedure

Using either a brush, roller, or spray, apply liberal amounts of A-Plus Impregnator® Sealer on the porous substrate until wet.
If surface is very porous, apply another treatment after 1 hour.
Allow surface to fully dry at least 6 hours before subjecting to normal use or before testing its water repellant property.

A-Plus Impregnator® Water Repellent Sealer

Specifications

Surface Preparation & Precautions

Painting Procedure

Related products

Login