A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

A-Plus® Vinyl Tiles Glue is a fast drying water-based synthetic white glue formulated for fast bonding of vinyl tiles, linoleum, plastics, lightweight ceramic tiles, and other lightweight and non-porous surfaces. It exhibits excellent bonding and water resistance properties and resists shrinkage and debonding.

☑Water-Based 1-Component

☑Ready-To-Use, Quick-Setting & Fast Drying

☑Superior Bonding Strength For Porous Substrates

☑Water and Moisture Resistant

☑Resists Shrinkage and Debonding

☑Low Odor, Low VOC, Environment Friendly

Specifications

Principal Uses: Ideal for vinyl tiles, paper, plastics, cartons, plastic, styrofoam, textile, ceramics, and other industrial applications.

Surface Dry: 30 mins

Full Cure: 2 – 3 hours

Clean-up Solvent: Water

Application: Brush/Putty Knife/Spatula

Packaging: 100mL, 1L, 4L

Surface Preparation & Precautions

Surface to be bonded must be free from dirt, dust, oil, grease, and other foreign contaminants that may affect adhesion.
Mix well before using.
Clean-up tools and equipment with water after using.
Avoid prolonged exposure of product to air as it cures/dries fast.

Painting Procedure

For Bonding Vinyl Tiles on Floors:

Surface to be bonded must be completely clean and free from dust, oils, and other loose materials.
Evenly spread a layer of A-Plus® Vinyl Tiles Glue on the floor with appropriate tools such as a brush or roller.
Lay the tiles on the floor immediately while the applied glue is still wet and align the tiles to desired position.
Gently press the tiles to purge any entrapped air pockets underneath while simultaneously adjusting to secure position. Wipe off excess glue with water.
Allow to fully cure overnight before subjecting to mechanical testing.

A-Plus® Vinyl Tiles Glue

Specifications

Surface Preparation & Precautions

Painting Procedure

For Bonding Vinyl Tiles on Floors:

Related products

Login