A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

A-Plus SoHo Selene® Luxury Designer Effects is a premium water-based decorative paint inspired by the celestial allure of the moon’s intricate textures and patterns. It is formulated for effortless application and dries fast to a flawless, durable, dust-free finish that boasts a luxuriously smooth modern surface. Each stroke bespeaks a legacy of craftsmanship. Depending on the chosen application technique and style, it creates an enchanting interplay of shadows and highlights that further accentuates the texture. Its versatile nature, whether left in its natural state or mixed with the finest colorants, allows it to seamlessly integrate into any opulent living space. Resilient and durable, this finish epitomizes both luxury and functionality, gracing interior and exterior walls alike with an air of regality. Its finish is one of understated elegance, making it a popular choice for creating an atmosphere of refined luxury in both residential and commercial settings.

☑State of the Art Water-Based Special Effects Paint
☑Ready to Use, Fast-Drying, Non-Sagging
☑Suitable for Interior Use
☑Superior Adhesion, Color Retention, and Durability
☑Water-Tight, Scratch Resistant
☑Does Not Crack, Good Sanding Capability
☑Tintable to Thousands of Color Effects
☑Lead-Free, Non-Toxic, Easy to Clean

Category: Decorative Paints Tag: Specialty Water Based Coatings

Specifications

Principal Uses: Ideal for interior accent walls, powder rooms, faux concrete or venetian plasters, creative textured finishes on dry walls, wood, fiber cement boards, and many more.

Sheen: Medium Gloss

Coverage: 15-18 sqm per gallon / coat depending on surface porosity and desired finish

Surface Dry: 1-2 hours

Recoat Interval: 2 hours

Dry Through: Overnight

Thinning: N/A

Clean-up Solvent: Water

Application: Brush, Roller, Steel Trowel

Packaging: 1L

Available in: Factory Mixed Colors

Surface Preparation & Precautions

General Precautions:

The resulting finish may vary according to application technique, applicator, substrate color, tools used, lighting, and many more.
For best results, apply in a small area first to confirm desired effect.
If desired, this product may be tinted using A-Plus® Acri-Tinting Colorants to achieve various shades.
The color of the wall may affect the overall tone especially for gray substrates.
Paint your wall’s first coat in one session to prevent overlapping and edges to dry out.
Avoid retouching spots on areas once you have painted, as this could result in a patchy looking result.
Do make use of consistent strokes during application to ensure uniformity of the overall effect.
Wipe trowel edges periodically to clean and prevent build-up of dried material. Installed finishes exhibit variations in lightness/darkness. Use a flexible, plastic trowel to avoid metal marks or “staining” the finish.
Store in a cool dry place, away from heat and exposure to sunlight.

Surface Preparation:

Surface to be coated must be thoroughly cleaned, free of any dirt, curing compounds, or contaminants.
Scrape off cement residue and loose material using a stiff brush or spatula then sand away rough edges.
For fresh concrete, apply at least 1-2 coats of A-Plus® Concrete Sealer.
Do not intermix with other paint systems in order to preserve optimum product properties.
MIX WELL before using.

Painting Procedure

Application Procedure:

On very hot conditions prevent pre-mature drying by slightly misting/dampening the surface using a rag/sponge soaked in water.
Primer: Apply A-Plus SoHo® Primer-Sealer using either a brush or roller. Allow to dry for at least 2 hours.
First coat: Using a steel trowel or putty knife, apply a 1mm thin coat of A-Plus SoHo Selene® in random crisscross strokes until surface is fully covered. Do not allow edges to dry when working over large areas. Allow to dry for at least 2-3 hours before sanding lightly.
Second coat: Apply another coat of A-Plus SoHo Selene® at varying thickness and strokes to create the desired texture effect on the surface. Allow to dry overnight before final sanding.
Topcoat(Optional): For added protection and durability, apply A-Plus SoHo® Protective Finishing Sealer using either brush or roller.

A-Plus SoHo Selene® Luxury Designer Effects