A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

A_B Heavy-duty Marine Epoxy Adhesive Generic

A-Plus A&B® Heavy-Duty Marine Epoxy Adhesive is a solvent-free 2-component epoxy adhesive especially formulated for the demanding requirements of boat-building and repair. It exhibits superior bonding properties on various materials such as concrete, metal, wood, fiberglass, ceramics and many more. It bonds and cures to a very strong and durable material resistant to seawater, chemicals, weathering, and mechanical abuse. It will even adhere and cure over damp surfaces. A-Plus A&B® Heavy-Duty Marine Epoxy Adhesive is the ideal adhesive for use in heavy-duty construction works, repairs, and other industrial applications that require superior bonding strength.

☑100% Solids, Superior Strength, Durability, and Adhesion
☑Professional Use Epoxy Adhesive
☑Achieve up to 9500psi Compressive Strength(ASTM D695)
☑Excellent Resistance to Water, UV, and Spillage of Chemicals and Oils
☑Easily Spreadable and Sandable
☑Hardens, Toughens, and Improves Surface Against Mechanical Abuse and Impacts

Category: Epoxy & Adhesives

Specifications

Principal Uses:

☑For use in heavy-duty construction works, repairs, and other industrial applications that require superior bonding strength. Also used in boat building for increased strength, durability and reliability.

☑As a gap filler to seal dents, cracks, and voids between cement and gypsum boards, plywood, and other similar substrates.

☑As a concrete repair material for surface defects and cracks for rough concrete walls, ceilings, and floors.

☑As a metal repair material for filling gaps such as pitted metal surfaces, joints, and spot-welded areas on stairs. railings, fences, gates and many more.

☑As a repair adhesive used for attaching and bonding materials such as concrete, metal, plastic, wood, glass, and many more.

Surface Dry: 2 hrs

Dry Through: Cures in 3 hours. Full strength within 3 days.

Coverage: Approximately 4sqm at 2mm thickness per gallon set

Thinning and Clean-Up: A-Plus® PG Epoxy Reducer

Application: Putty Knife/Spatula

Packaging: 250mL, 1L, 4L

Mixing Ratio: 1:1

Pot life: 1-2 hrs

Color: Part A – Dark Gray; Part B – Light Yellow

Compressive Strength(ASTM D695): 9,500psi

Surface Preparation & Precautions

Surface must be thoroughly cleaned, free from any contaminants that may affect adhesion such as wax, oil, grease, rust and loose particles.
MIX WELL before using. Mixing ratio: 1:1 by volume, Component A and Component B.
Keep away from reach of children.
Avoid breathing vapor, use with adequate ventilation.
Avoid prolonged contact with skin. Wash hands thoroughly after handling, before eating or smoking.
All solvent-based and oil-based paints and putties are Flammable!

Application Procedure

Mix equal parts of components A and B thoroughly until a uniform color is achieved. Mix just enough amount that can be used within the pot life period.
Apply and spread the mixture over the prepared surface using a putty knife.
Allow to cure for at least 3 hours before sanding and filling. If necessary, additional layers may be applied within 2-3 hours depending on surrounding conditions.
Allow to cure for at least 3 days before subjecting to extreme conditions.
Use A-Plus® PG Epoxy Reducer to clean up excess material from equipment used while material has not yet hardened.

A-Plus A&B® Heavy-Duty Marine Epoxy Adhesive

Specifications

Surface Preparation & Precautions

Application Procedure

Related products

Login