A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

A-Plus® Chlorinated Rubber Based Traffic Paint

A-Plus® Reflectorized Chlorinated Rubber Based Traffic Paint

A-Plus® Hi-Performance Chlorinated Rubber Based Traffic Paint is a new generation modified CRB coating specifically formulated for road and street marking applications. It is a one-component paint that dries fast to an extremely strong durable film. It has superior outdoor durability, extreme abrasion resistance, and can withstand sunlight exposure. It is the professional choice best used for exposed outdoor sidewalks, light posts, parking areas, road markings, humps, and many more.

A-Plus® Hi-Performance Chlorinated Rubber Based Traffic Paint is a new generation modified CRB coating specifically formulated for road and street marking applications. It is a one-component paint that dries fast to an extremely strong durable film. It has superior outdoor durability, excellent low-light visibility, extreme abrasion resistance, and can withstand sunlight exposure. It is the professional choice best used for exposed outdoor sidewalks, light posts, parking areas, road markings, humps, and many more.

☑Modified Chlorinated Rubber Based Traffic Paint
☑Easy To Apply, Dries Fast, Easy to Maintain
☑Alkali-Resistant, Non-Flaking, Non-Chalking, Non-Cracking
☑Outstanding Adhesion and Durability, Easy Maintenance/Cleaning
☑Superior Resistance to UV Exposure, Chemicals, and Weathering
☑Excellent Adhesion and Abrasion Resistance
☑Ideal for All Road Marking Applications
☑Lead-Free

Categories: Decorative Paints, Traffic Paint Tag: Alkyd Enamel / Oil Based Coatings

Specifications

Principal Uses: Best used for exposed outdoor sidewalks, light posts, parking areas, roadmarkings, humps, and many more.

Sheen: Gloss

Coverage: First Coat: 16-20 sqm per gallon, Second Coat: 20-25 sqm per gallon (depending on surface porosity)

Surface Dry: 1 hr

Recoat Interval: 2-3 hrs

Dry Through: Overnight curing time for light traffic, 3-7 days to achieve full strength

Thinning: Up to 1L A-Plus Floor Master® Reducer per gallon paint

Clean-up Solvent: A-Plus Floor Master® Reducer

Application: Brush, Roller, Spray

Packaging: 1L, 4L, 16L

Available in: Yellow, Black, White

Surface Preparation & Precautions

For Concrete Surfaces:

Ensure proper surface preparation by removing any oil and dirt by detergent cleaning.
Sand or use a mechanical floor grinder with large grit to roughen and level the surface, allowing the paint enhanced grip and adhesion.
Surface must be completely dry and clean before application of paint.
To repair large concrete surface imperfections, use either of the following:
- A-Plus Procrete® Low Viscosity Construction Epoxy – used for patching medium-sized concrete imperfections covering a large area.
- A-Plus Procrete® High Viscosity Construction Epoxy – used for patching larger-sized concrete imperfections covering smaller areas.
If previously painted, strip off all paint to bare substrate with A-Plus Supertanggal® Paint Remover.
MIX WELL BEFORE USING.

For Metal Surfaces:

Remove dust, dirt, grease, oil, wax and other foreign matter by sanding and using a rag soaked in paint thinner.
For repainting, use A-Plus Supertanggal® Paint Remover to strip off old paint film to bare substrate then remove oil and grease by solvent cleaning followed by scuff sanding. To remove rust, wire brush or strip affected areas after applying A-Plus® Rust Converter. Let it sit for 10 – 15 minutes before washing off surface thoroughly with water, letting it dry before applying paint.
Primer should be applied immediately upon drying of the surface before rust sets in.

Painting Procedure

For New Concrete:

Surface should be clean and dry, free from dust, dirt and other foreign contaminants. For repainting concrete, strip off loose/old paint to bare substrate.
First coat will serve as primer/sealer. Apply 1 coat of A-Plus® Hi-Performance Chlorinated Rubber Based Traffic Paint at 25% dilution with A-Plus® FloorMaster Reducer. Apply using either a brush, roller, or spray. Allow to cure for at least 1 hour before proceeding with the topcoat.
Topcoat: Apply at least 1-2 coats A-Plus® Hi-Performance Chlorinated Rubber Based Traffic Paint at 10% dilution with A-Plus® FloorMaster Reducer. Apply using either a brush, roller, or spray.
Allow the surface to cure overnight before subjecting to light traffic. Allow the surface to cure for at least 3-7 days before subjecting to heavy traffic.

For Metal Surfaces:

Surface should be clean and dry, free from dust, dirt and other foreign contaminants. For repainting concrete, strip off loose/old paint to bare substrate.
Primer: Apply at least 1 coat of Glazer Galva-Plus® Epoxy Primer. Allow to fully cure before proceeding with the topcoat.
Topcoat: Apply at least 2 coats A-Plus® Hi-Performance Chlorinated Rubber Based Traffic Paint using either a brush, roller, or spray.
Allow the surface to cure overnight before subjecting to light traffic. Allow the surface to cure for at least 3-7 days before subjecting to heavy traffic.

A-Plus® CRB & Reflectorized Traffic Paint

Specifications

Surface Preparation & Precautions

For Concrete Surfaces:

For Metal Surfaces:

Painting Procedure

For New Concrete:

For Metal Surfaces:

Related products

Login