A-Plus® Metal Primer

For New Galvanized Iron:

1. Remove dust, dirt, grease, oil, wax and other foreign matter using a rag soaked in paint thinner.
2. Acid etch the surface by applying 10% A-Plus® Rust Converter (dilute 1 part solution to 9 parts water). Let it sit for 10 – 15 minutes before washing off surface thoroughly with water, letting it dry before applying paint.

For Repainting:

1. Scrape off old paint film to bare substrate then remove oil and grease by detergent cleaning followed by scuff sanding. If necessary, use A-Plus Supertanggal® Paint Remover.
2. To remove rust, wire brush or sand affected areas while applying A-Plus® Rust Converter. Let it sit for 10 – 15 minutes before washing off surface thoroughly with water, letting it dry before applying paint.
3. A-Plus® Metal Primer should be applied immediately upon drying of the surface before rust sets in.