A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

A-Plus PowerRoof® is a premium pure Acrylic water-based roofing paint designed to provide excellent beautification and protection for roofs. The paint dries to a glossy, tough, durable, and dirt-resisting finish. It can be applied on most common roof materials like galvanized iron sheets and cementitious roof tiles. It also has heat reflective properties which helps minimize transfer of solar heat to the house’s interiors.

☑100% Premium Acrylic Roofing Paint
☑Excellent Weatherability & Ultraviolet Resistance
☑Fast Drying High-Gloss Durable Finish
☑Very Good Color Retention and Adhesion
☑Excellent Dirt Pick-Up Resistance, Easy to Clean
☑Easy to Apply, Lead-Free, Environment Friendly Paint
☑Available in 16 Factory-Mixed Colors

Specifications

Principal Uses: Exterior Galvanized Iron surfaces, pre-painted Galvanized Sheets, Asphalt Shingles, Unglazed and Cementitious Roof Tiles, etc.

Sheen: Glossy

Coverage: 25-30 sqm per gallon / coat

Surface Dry: 30 mins – 1hr

Recoat Interval: 1 – 2 hrs

Dry Through: 2 – 3 hrs

Thinning: Use as supplied. Thinning is not recommended as it may affect paint properties.

Clean-up Solvent: Water

Application: Brush, Roller, or Spray

Packaging: 4L, 16L plastic containers

*Available in 15 factory mixed colors

Surface Preparation & Precautions

Surface to be painted must be thoroughly cleaned, free from any contaminants. Avoid painting under extreme environmental conditions and/or bad weather conditions.
If painting over new concrete, it must be allowed to cure for at least four weeks. Otherwise, apply A-Plus® Concrete Sealer before painting.
If previously painted, strip off all paint to bare substrate with A-Plus Supertanggal® Paint Remover.
New galvanized surfaces must be wiped with paint thinner and sanded to improve paint adhesion. Non-galvanized or rusting metal roof sheets should be treated and sanded clean with A-Plus® Rust Converter and pre-painted with at least 2 coats of a good anti-corrosive metal primer such as A-Plus PowerRoof® Anti-Corrosive Primer, Glazer Galva-Plus® Epoxy Primer, or A-Plus® Metal Primer Red Oxide.

Painting Procedure

Painting Procedure on Metal Substrate:

If previously painted, strip off all loose and chalking paint. If rust is present, sand with large grit sandpaper after applying A-Plus® Rust Converter to roughen surface.
Primer: Un-Galvanized or rusted metal roof sheets should be pre-painted with at least 2 coats of A-Plus PowerRoof® Anti-Corrosive Primer or Glazer Galva-Plus® Epoxy Primer.
Topcoat: Apply 2-3 coats of your choice color of A-Plus PowerRoof®. Allow 2-3 hours drying time between each coat.

Painting Procedure on Cementitious Roofing:

If previously painted, strip off all loose and chalking paint and sand to roughen surface.
Waterproofing: Observe proper concrete curing schedule. For positive side waterproofing on areas such as roofdecks, etc., apply 3-4 coats of a mixture of A-Plus® Concrete Bond with portland cement at 1-Ltr to 1-Kg ratio. Pot life is approx 4 hours. Allow 2-3 hours drying between each coat. For superior waterproofing on both positive and negative side water pressure, apply 2-3 coats of A-Plus Water-Check®.
Topcoat: Apply 2-3 coats of your choice color of A-Plus PowerRoof®. Allow 2-3 hours drying time between each coat.

COLOR SWATCHES

1815

LAGUNA WHITE
1827

SAMAR BEIGE®
1847

TERRA COTTA
1862

MOROCCO BLUE
1845

CANYON RED
1852

BAGUIO GREEN
1846

SPANISH RED
1823

VANILLA SKY
1842

SANTANA RED
1832

PANDORA
1868

OCEANIC BLUE
1848

LUCKY MOCHA
1843

GRAND PAVILION
1849

CLASSIC BROWN
1858

HEALTHY GREEN

A-Plus PowerRoof® Acrylic Roofing Paint