A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

Hanscoat® 2K Polyurethane Super Topcoat Clear is a 2-component Polyurethane topcoat clear that exhibits non-yellowing, high-solids, ultra-fast curing, and long-lasting super gloss finish as well as superior resistance against UV exposure and abrasion.

☑Utilizes the Technology of Modified 2K Polyurethane Paint System
☑Non-Yellowing, Ultra Fast Curing, High Solids
☑Formulated Using High Grade Resins
☑Withstands Extreme Sunlight and Weather Conditions
☑Reinforced with UV Absorber and Light Stabilizer
☑Ideal for Land, Air, and Sea Transportation Vehicles

Category: Automotive Coatings Tag: Two-component Polyurethane Based Coatings

Specifications

Principal Uses: As a premium high gloss topcoat for Hanscoat® Automotive Finishes

Sheen: Super Gloss

Coverage: 20-25 square meter per gallon / coat

Surface Dry: 30 mins

Recoat Interval: 3 – 5 hours sandable

Dry Through: 1-2 weeks before polishing/buffing

Thinning: Reduce with Hanscoat® Polyurethane Super Gloss Thinner at ratio 1:1

Clean-up Solvent: A-Plus® PG Urethane Thinner or Hanscoat® Super Gloss Polyurethane Thinner

Application: Spray

Packaging: 1L, 4L

Mixing Ratio: 3:1 Paint and Catalyst, respectively

Surface Preparation & Precautions

1. Surface to be painted must be free from contaminants like dirt, grease, and other foreign matters.
2. For Damaged Surfaces: Sand thoroughly and wipe dry with cleaning solvent prior to application of primers. If necessary, strip off old paint using A-Plus Supertanggal® Paint Remover.
3. For Bare Metal: Prime using either Hanscoat® Automotive Anti-Corrosive Epoxy Primer or Hanscoat® 2K Polyurethane Anti-Corrosion Primer as an undercoat.
4. Repair all major dents and surface imperfections with A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, patch up with Hanscoat® Automotive Pure Acrylic Putties.
5. Apply at least 2 coats of Hanscoat® Pure Acrylic Primer Surfacer or Hanscoat® 2K Polyurethane Spray Filler to act as an intermediate coat between undercoat, putty, and basecoat. Allow 15 mins flash-off time between each coat.
6. Observe 3-5 hours full drying time for all primers, putties, and fillers before application of colors and topcoats.

Painting Procedure

Undercoat Primer: Apply at least 2 coats of Hanscoat® 2K Polyurethane Anti-Corrosion Primer as undercoat. Mixing ratio is 3:1 paint to catalyst, respectively. Reduce with Hanscoat® Polyurethane Super Gloss Thinner at ratio 1:1.
Putty: Repair all major dents and surface imperfections with A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, patch up with Hanscoat® Automotive Pure Acrylic Putties. Sand smooth before next step.
Primer Surfacer: Apply at least 2 coats of Hanscoat® 2K Polyurethane Spray Filler to act as an intermediate coat between the undercoat, putty, and the basecoat. Mixing ratio is 3:1 paint to catalyst, respectively. Reduce with Hanscoat® Polyurethane Super Gloss Thinner at ratio 1:1.
Basecoat: Choose desired color from Hanscoat® Automotive Pure Acrylic Paint as basecoat. Apply 2-3 full basecoats.
Topcoat: Finish with 2-3 full coats of Hanscoat® Automotive Pure Acrylic Topcoat Clear or Hanscoat® 2K Polyurethane Topcoat Clear.
Allow 10-15 mins flash-off time between each coat. Bake at 60°C for 30 mins or air dry for at least 6-8 hours (Pure Acrylic System) and 18-24 hours (2K Polyurethane System)

Hanscoat® 2K Polyurethane Super Topcoat Clear

Specifications

Surface Preparation & Precautions

Painting Procedure

Related products

Login