A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

Hanscoat® Automotive Anti-Corrosive Epoxy Primer is a professional grade 2-component Epoxy primer that exhibits excellent anti-corrosion properties. It has superior adhesion and sandability which makes it an ideal undercoat for automotive refinishings and bare substrates.

☑2-Component Epoxy Primer System
☑Long Term Protection Against Abrasion and Rusting
☑Superior Durability and Adhesion
☑Excellent Resistance to Acids and Chemicals
☑Outstanding Anti-Corrosive Properties
☑Lead-Free

Category: Automotive Coatings

Specifications

Principal Uses: As a heavy duty primer for bare substrates

Sheen: Flat

Coverage: 20-25 square meter per gallon / coat

Surface Dry: 2 – 3 hours

Recoat Interval: 6 – 8 hours

Dry Through: Overnight

Thinning: Reduce 1:1 with A-Plus® PG Epoxy Reducer

Clean-up Solvent: A-Plus® PG Epoxy Reducer

Application: Spray

Packaging: 1L, 4L

Mixing Ratio: 3:1 Paint and Catalyst, respectively

Surface Preparation & Precautions

Surface to be painted must be free from contaminants like dirt, grease, and other foreign matters.
For Damaged Surfaces: Sand thoroughly and wipe dry with cleaning solvent prior to application of primers. If necessary, strip off old paint using A-Plus Supertanggal® Paint Remover.
For Bare Metal: Prime using either Hanscoat® Automotive Anti-Corrosive Epoxy Primer or Hanscoat® 2K Polyurethane Anti-Corrosion Primer as an undercoat.
Repair all major dents and surface imperfections with A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, patch up with Hanscoat® Automotive Pure Acrylic Putties.
Apply at least 2 coats of Hanscoat® Pure Acrylic Primer Surfacer or Hanscoat® 2K Polyurethane Spray Filler to act as an intermediate coat between undercoat, putty, and basecoat. Allow 15 mins flash-off time between each coat.
Observe 3-5 hours full drying time for all primers, putties, and fillers before application of colors and topcoats.

Painting Procedure

Undercoat Primer: Apply at least 2 coats of Hanscoat® Automotive Anti-Corrosive Epoxy Primer or Hanscoat® 2K Polyurethane Anti-Corrosion Primer as undercoat.
Putty: Repair all major dents and surface imperfections with A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, patch up with Hanscoat® Automotive Pure Acrylic Putties.
Primer Surfacer: Apply at least 2 coats of Hanscoat® Pure Acrylic Primer Surfacer or Hanscoat® 2K Polyurethane Spray Filler to act as an intermediate coat between the undercoat, putty, and the basecoat. Allow 15 minutes flash-off time between each coat.
Basecoat: Choose desired color from Hanscoat® Automotive Pure Acrylic Paint as basecoat. Apply 2-3 full basecoats.
Topcoat: Finish with 2-3 full coats of Hanscoat® Automotive Pure Acrylic Topcoat Clear or Hanscoat® 2K Polyurethane Topcoat Clear.
Allow 10-15 mins flash-off time between each coat. Bake at 60°C for 30 mins or air dry for at least 6-8 hours (Pure Acrylic System) and 18-24 hours (2K Polyurethane System)

Hanscoat® Automotive Anti-Corrosive Epoxy Primer

Specifications

Surface Preparation & Precautions

Painting Procedure

Related products

Login