Specifications
Principal Uses: As a putty for patching minor surface imperfections on automotive refinishings
Surface Dry: 30 mins
Dry Through: 1 hour
Clean-up Solvent: A-Plus® Acrylic Thinner
Application: Spatula
Packaging: 1L, 4L
Hanscoat® Automotive Pure Acrylic Putty is a solvent-based 1K Thermoplastic Acrylic putty used for patching minor surface imperfections on automotive refinishings. It is easily sandable and exhibits excellent adhesion and durability.
☑1-Component Thermoplastic Acrylic System
☑Smooth Sandable Finish
☑Superior Durability and Adhesion
☑Excellent Resistance to Acids and Chemicals
☑Outstanding Anti-Corrosive Properties
☑Lead-Free
Surface Preparation & Precautions
- Surface to be painted must be free from contaminants like dirt, grease, and other foreign matters.
- For Damaged Surfaces: Sand thoroughly and wipe dry with cleaning solvent prior to application of primers. If necessary, strip off old paint using A-Plus Supertanggal® Paint Remover.
- For Bare Metal: Prime using either Hanscoat® Automotive Anti-Corrosive Epoxy Primer or Hanscoat® 2K Polyurethane Anti-Corrosion Primer as an undercoat.
- Repair all major dents and surface imperfections with A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, patch up with Hanscoat® Automotive Pure Acrylic Putties.
- Apply at least 2 coats of Hanscoat® Pure Acrylic Primer Surfacer or Hanscoat® 2K Polyurethane Spray Filler to act as an intermediate coat between undercoat, putty, and basecoat. Allow 15 mins flash-off time between each coat.
- Observe 3-5 hours full drying time for all primers, putties, and fillers before application of colors and topcoats.
Painting Procedure
- Undercoat Primer: Apply at least 2 coats of Hanscoat® Automotive Anti-Corrosive Epoxy Primer or Hanscoat® 2K Polyurethane Anti-Corrosion Primer as undercoat.
- Putty: Repair all major dents and surface imperfections with A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, patch up with Hanscoat® Automotive Pure Acrylic Putties.
- Primer Surfacer: Apply at least 2 coats of Hanscoat® Pure Acrylic Primer Surfacer or Hanscoat® 2K Polyurethane Spray Filler to act as an intermediate coat between the undercoat, putty, and the basecoat. Allow 15 minutes flash-off time between each coat.
- Basecoat: Choose desired color from Hanscoat® Automotive Pure Acrylic Paint as basecoat. Apply 2-3 full basecoats.
- Topcoat: Finish with 2-3 full coats of Hanscoat® Automotive Pure Acrylic Topcoat Clear or Hanscoat® 2K Polyurethane Topcoat Clear.
- Allow 10-15 mins flash-off time between each coat. Bake at 60°C for 30 mins or air dry for at least 6-8 hours (Pure Acrylic System) and 18-24 hours (2K Polyurethane System)
Related products
Automotive Coatings
Automotive Coatings
Automotive Coatings
Automotive Coatings
Automotive Coatings
Automotive Coatings
Automotive Coatings